Datasheet Texas Instruments TPS61151DRCT — 数据表

制造商Texas Instruments
系列TPS61151
零件号TPS61151DRCT
Datasheet Texas Instruments TPS61151DRCT

双路,2x 27V,700mA开关,1.2MHz升压转换器,带单电感器白光LED切换器(高达2x6)10-VSON -40至85

数据表

TPS6115x Dual-Output Boost WLED Driver Using Single Inductor datasheet
PDF, 1.1 Mb, 修订版: E, 档案已发布: Nov 30, 2015
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin10
Package TypeDRC
Industry STD TermVSON
JEDEC CodeS-PDSO-N
Package QTY250
CarrierSMALL T&R
Device MarkingBRH
Width (mm)3
Length (mm)3
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical Data下载

参数化

Number of Channels2
Duty Cycle(Max)93 %
LED12
LED Current Per Channel23 mA
Operating Temperature Range-40 to 85 C
Package GroupVSON
Package Size: mm2:W x L10VSON: 9 mm2: 3 x 3(VSON) PKG
Peak Efficiency85 %
RatingCatalog
Shutdown Current(Typ)1.5 uA
Special FeaturesSynchronous Rectification
Switching Frequency(Max)1200 kHz
TopologyBoost
TypeInductive
Vin(Max)6 V
Vin(Min)3 V
Vout(Max)27 V
Vout(Min)2.5 V

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: TPS61150EVM-150
    TPS61150EVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • TPS61150 Dual Output Boost Converter Drive Up to 14 WLED Keypad LCD Backlight
    PDF, 70 Kb, 档案已发布: Jul 5, 2006
    The TPS61150/1 is a high-frequency boost converter with two regulated current outputs for driving white light-emitting diodes (WLED). The reference design and applications examples in this document show the TPS61150 driving up to 14 WLEDs, a keypad, and a LCD backlight application. The two current outputs are ideal for driving WLED backlight for the sub and main displays in clamshell phones.
  • Analog PWM Dimming in White-LED Drivers
    PDF, 539 Kb, 档案已发布: Dec 21, 2016
    Pulse-width modulation (PWM) is a common type of dimming used to adjust the current in white-LEDdriver devices. PWM dimming takes a rectangle waveform with variable positive duty cycle (D) and adjuststhe LED current proportionally. For many smaller format white LED drivers (7-inch screen size or smaller),the PWM signal is converted to a DC control voltage and made to drive the LED current in
  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, 档案已发布: Sep 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, 档案已发布: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

模型线

系列: TPS61151 (4)

制造商分类

  • Semiconductors > Power Management > LED Driver > Backlight LED Driver