Datasheet Texas Instruments LMH6629MF/NOPB — 数据表
制造商 | Texas Instruments |
系列 | LMH6629 |
零件号 | LMH6629MF/NOPB |
具有关断状态的超低噪声,高速运算放大器5-SOT-23 -40至125
数据表
LMH6629 Ultra-Low Noise, High-Speed Operational Amplifier with Shutdown datasheet
PDF, 9.2 Mb, 修订版: I, 档案已发布: Dec 5, 2014
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
打包
Pin | 5 |
Package Type | DBV |
Industry STD Term | SOT-23 |
JEDEC Code | R-PDSO-G |
Package QTY | 1000 |
Carrier | LARGE T&R |
Device Marking | AE7A |
Width (mm) | 1.6 |
Length (mm) | 2.9 |
Thickness (mm) | 1.2 |
Pitch (mm) | .95 |
Max Height (mm) | 1.45 |
Mechanical Data | 下载 |
参数化
2nd Harmonic | 88 dBc |
3rd Harmonic | 74 dBc |
@ MHz | 1 |
Acl, min spec gain | 4 V/V |
Additional Features | Decompensated |
Architecture | Bipolar,Voltage FB |
BW @ Acl | 900 MHz |
CMRR(Min) | 82 dB |
CMRR(Typ) | 87 dB |
GBW(Typ) | 4000 MHz |
Input Bias Current(Max) | 23000 pA |
Iq per channel(Max) | 16.7 mA |
Iq per channel(Typ) | 15.5 mA |
Number of Channels | 1 |
Offset Drift(Typ) | 0.45 uV/C |
Operating Temperature Range | -40 to 125,-40 to 85 C |
Output Current(Typ) | 250 mA |
Package Group | SOT-23 |
Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
Rail-to-Rail | No |
Rating | Catalog |
Slew Rate(Typ) | 1100 V/us |
Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 0.69 nV/rtHz |
Vn at Flatband(Typ) | 0.69 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 0.78 mV |
生态计划
RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: LMH6629SDEVAL
Evaluation Board for the LMH6629
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: LMH730316
LMH730316 Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package
Lifecycle Status: Active (Recommended for new designs)
应用须知
- AN-1604 Decompensated Operational Amplifiers (Rev. B)PDF, 206 Kb, 修订版: B, 档案已发布: May 1, 2013
This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented. - OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)PDF, 594 Kb, 修订版: F, 档案已发布: May 1, 2013
This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers. - Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)PDF, 153 Kb, 修订版: A, 档案已发布: May 16, 2017
This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi - Considerations for High-Gain Multistage DesignsPDF, 347 Kb, 档案已发布: May 13, 2013
模型线
系列: LMH6629 (7)
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)