Datasheet Texas Instruments TPS61062YZFR — 数据表

制造商Texas Instruments
系列TPS61062
零件号TPS61062YZFR
Datasheet Texas Instruments TPS61062YZFR

带亮度控制的24V,400mA开关,1MHz升压转换器,用于白光LED电源8-DSBGA -40至85

数据表

TPS6106x Constant Current LED Driver With Digital and PWM Brightness Control datasheet
PDF, 982 Kb, 修订版: B, 档案已发布: Dec 9, 2014
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin8
Package TypeYZF
Industry STD TermDSBGA
JEDEC CodeS-XBGA-N
Package QTY3000
CarrierLARGE T&R
Device MarkingAKZ
Width (mm)1.75
Length (mm)1.75
Pitch (mm).5
Max Height (mm).625
Mechanical Data下载

参数化

Number of Channels1
Duty Cycle(Max)95 %
LED5
LED Current Per Channel50 mA
Operating Temperature Range-40 to 85 C
Package GroupDSBGA
Package Size: mm2:W x LSee datasheet (DSBGA) PKG
Peak Efficiency81 %
RatingCatalog
Shutdown Current(Typ)1 uA
Special FeaturesLoad Disconnect During Shutdown
Switching Frequency(Max)1200 kHz
TopologyBoost
TypeInductive
Vin(Max)6 V
Vin(Min)2.7 V
Vout(Max)24 V
Vout(Min)2.7 V

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: TPS61061EVM-091
    TPS6106x Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • TPS61060 Dynamic Voltage Adjustment
    PDF, 223 Kb, 档案已发布: Oct 6, 2006
    The TPS61060, TPS61061, and TPS61062 are efficient white light-emitting diode (WLED) drivers. These ICs also can be configured as a constant voltage power supply. When in constant voltage mode, the TPS6106x family provides the capability for dynamic voltage scaling. This application report shows the user how to configure the IC for dynamic voltage scaling.
  • TPS61060/61/62: Single-Wire Digital Brightness Control
    PDF, 289 Kb, 档案已发布: May 5, 2006
    The TPS6106x features a simple digital interface to allow brightness control using a single wire to control the converter. This application report shows the circuit configuration and the programming of the interface.
  • TPS61060 Voltage Regulation Mode
    PDF, 135 Kb, 档案已发布: Oct 10, 2006
    The TPS61060, TPS61061, and TPS61062 are efficient white light-emitting diodes (WLED) drivers. The standard mode of operation is to regulate a constant current through a string of WLEDs, but these ICs can also operate as a standard constant output voltage supply. This document shows the user how to configure the TPS6106x to generate a constant output voltage. It also provides guidelines on the app
  • Powering Multiple White LEDs, PWM & Digital Dimming Control Using TPS61060/1/2
    PDF, 121 Kb, 档案已发布: Jun 13, 2006
    The TPS61060/1/2 are inductive, high-frequency, synchronous boost converters with a constant current output to drive up to 5 white LEDs. The reference design and application examples shown in this document implement the TPS6106x devices powering multiple white LEDs, a digital brightness control application, and an example of an efficiency measurement setup.
  • Drive High Current LEDs
    PDF, 437 Kb, 档案已发布: Jan 25, 2007
    This application report presents high-current LED driving requirements that use the TI integrated boost converter IC TPS6106x and integrated buck converter IC bqSWITCHERв„ў (bq2410x/11x/12x). Step-by-step design procedures, measurement results, and two dimming methods are provided and discussed.
  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, 档案已发布: Sep 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, 修订版: A, 档案已发布: May 11, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, 修订版: B, 档案已发布: Jun 15, 2017
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, 修订版: A, 档案已发布: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

模型线

系列: TPS61062 (3)

制造商分类

  • Semiconductors > Power Management > LED Driver > Backlight LED Driver