Datasheet Texas Instruments THS4140CDGN — 数据表

制造商Texas Instruments
系列THS4140
零件号THS4140CDGN
Datasheet Texas Instruments THS4140CDGN

具有关断功能的全差分输入/输出高转换率放大器8-MSOP-PowerPAD 0至70

数据表

High-Speed Fully Differential I/O Amplifiers datasheet
PDF, 1.2 Mb, 修订版: F, 档案已发布: Jan 31, 2006
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin8
Package TypeDGN
Industry STD TermHVSSOP
JEDEC CodeS-PDSO-G
Package QTY80
CarrierTUBE
Device MarkingAOF
Width (mm)3
Length (mm)3
Thickness (mm)1.02
Pitch (mm).65
Max Height (mm)1.1
Mechanical Data下载

参数化

2nd Harmonic83 dBc
3rd Harmonic80 dBc
@ MHz1
Acl, min spec gain1 V/V
Additional FeaturesShutdown
ArchitectureFully Differential,Voltage FB
BW @ Acl160 MHz
CMRR(Min)75 dB
CMRR(Typ)84 dB
GBW(Typ)170 MHz
Input Bias Current(Max)15000000 pA
Iq per channel(Max)16 mA
Iq per channel(Typ)13.2 mA
Number of Channels1
Offset Drift(Typ)7 uV/C
Operating Temperature Range-40 to 85,0 to 70 C
Output Current(Typ)85 mA
Package GroupMSOP-PowerPAD
Package Size: mm2:W x L8MSOP-PowerPAD: 15 mm2: 4.9 x 3(MSOP-PowerPAD) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)450 V/us
Total Supply Voltage(Max)33 +5V=5, +/-5V=10
Total Supply Voltage(Min)4 +5V=5, +/-5V=10
Vn at 1kHz(Typ)6.7 nV/rtHz
Vn at Flatband(Typ)6.5 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)7 mV

生态计划

RoHSCompliant

设计套件和评估模块

  • Evaluation Modules & Boards: THS4140EVM
    THS4140EVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

应用须知

  • Fully-Differential Amplifiers (Rev. E)
    PDF, 867 Kb, 修订版: E, 档案已发布: Sep 19, 2016
    Differential signaling has been commonly used in audio, data transmission, and telephone systems for many years because of its inherent resistance to external noise sources. Today, differential signaling is becoming popular in high-speed data acquisition, where the ADC’s inputs are differential and a differential amplifier is needed to properly drive them.Two other advantages of di
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

模型线

制造商分类

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)