Datasheet Texas Instruments SN74LVC07ADBRG4 — 数据表

制造商Texas Instruments
系列SN74LVC07A
零件号SN74LVC07ADBRG4
Datasheet Texas Instruments SN74LVC07ADBRG4

具有漏极开路输出的六路缓冲器/驱动器14-SSOP -40至125

数据表

SN74LVC07A Hex Buffer and Driver With Open-Drain Outputs datasheet
PDF, 1.2 Mb, 修订版: W, 档案已发布: Nov 13, 2015
从文件中提取

价格

状态

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

打包

Pin14
Package TypeDB
Industry STD TermSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingLC07A
Width (mm)5.3
Length (mm)6.2
Thickness (mm)1.95
Pitch (mm).65
Max Height (mm)2
Mechanical Data下载

参数化

Bits10
F @ Nom Voltage(Max)110 Mhz
ICC @ Nom Voltage(Max)0.01 mA
Operating Temperature Range-40 to 125,-40 to 85 C
Output Drive (IOL/IOH)(Max)-24/24 mA
Package GroupSSOP
Package Size: mm2:W x L14SSOP: 48 mm2: 7.8 x 6.2(SSOP) PKG
RatingCatalog
Schmitt TriggerNo
Technology FamilyLVC
VCC(Max)5.5 V
VCC(Min)1.65 V
Voltage(Nom)1.8,2.5,2.7,3.3,5 V
tpd @ Nom Voltage(Max)5.6,3.4,3.3,3.6,2.6 ns

生态计划

RoHSCompliant

应用须知

  • LVC07A: Applications Of An Open-Drain Hex Buffer And Discussion Of Char Results
    PDF, 51 Kb, 档案已发布: Apr 8, 1999
    The Texas Instruments (TI) LVC07A hex buffer, with open-drain outputs, and its inverting counterpart, LVC06A, operate in the 1.65-V to 3.6-V VCC range, but can accept input voltages up to 5.5 V. Laboratory results show superior propagation times versus competitors, natural Ioff protection, and output-breakdown capability versus a competitor. Applications of the LVC07A and LVC06A include bus-conte
  • LVC Characterization Information
    PDF, 114 Kb, 档案已发布: Dec 1, 1996
    This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices.
  • Use of the CMOS Unbuffered Inverter in Oscillator Circuits
    PDF, 796 Kb, 档案已发布: Nov 6, 2003
    CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly
  • Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices
    PDF, 209 Kb, 档案已发布: May 10, 2002
    Many telecom and networking applications require that cards be inserted and extracted from a live backplane without interrupting data or damaging components. To achieve this interface terminals of the card must be electrically isolated from the bus system during insertion or extraction from the backplane. To facilitate this Texas Instruments provides bus-interface and logic devices with features

模型线

制造商分类

  • Semiconductors > Logic > Buffer/Driver/Transceiver > Non-Inverting Buffer/Driver