Datasheet Texas Instruments OPA180IDBVR — 数据表
制造商 | Texas Instruments |
系列 | OPA180 |
零件号 | OPA180IDBVR |
0.1-ОјV/В°C漂移,低噪声,轨至轨输出,36V,零漂移运算放大器5-SOT-23 -40至105
数据表
OPAx180 0.1-ОјV/В°C Drift, Low-Noise, Rail-to-Rail Output, 36-V, Zero-Drift Operational Amplifiers datasheet
PDF, 1.6 Mb, 修订版: D, 档案已发布: May 23, 2014
从文件中提取
价格
状态
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
打包
Pin | 5 |
Package Type | DBV |
Industry STD Term | SOT-23 |
JEDEC Code | R-PDSO-G |
Package QTY | 3000 |
Carrier | LARGE T&R |
Device Marking | SHJ |
Width (mm) | 1.6 |
Length (mm) | 2.9 |
Thickness (mm) | 1.2 |
Pitch (mm) | .95 |
Max Height (mm) | 1.45 |
Mechanical Data | 下载 |
参数化
Additional Features | EMI Hardened,Zero Drift |
Architecture | CMOS |
CMRR(Min) | 104 dB |
CMRR(Typ) | 114 dB |
GBW(Typ) | 2 MHz |
Input Bias Current(Max) | 1000 pA |
Iq per channel(Max) | 0.525 mA |
Iq per channel(Typ) | 0.45 mA |
Number of Channels | 1 |
Offset Drift(Typ) | 0.1 uV/C |
Operating Temperature Range | -40 to 105 C |
Output Current(Typ) | 18 mA |
Package Group | SOT-23 |
Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
Rail-to-Rail | In to V-,Out |
Rating | Catalog |
Slew Rate(Typ) | 0.8 V/us |
Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 4 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 10 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 0.075 mV |
生态计划
RoHS | Compliant |
应用须知
- Zero-drift Amplifiers: Features and Benefits (Rev. A)PDF, 131 Kb, 修订版: A, 档案已发布: Feb 9, 2017
- Offset Correction Methods: Laser Trim, e-Trim, and Chopper (Rev. A)PDF, 795 Kb, 修订版: A, 档案已发布: Jul 20, 2017
- Compensate Transimpedance Amplifiers Intuitively (Rev. A)PDF, 69 Kb, 修订版: A, 档案已发布: Mar 30, 2005
Transimpedance amplifiers are used to convert low-level photodiode currents to usable voltage signals. All too often, the amplifiers have to be empirically compensated to operate properly. The problem can be easily understood if one looks at all the elements involved. - Tuning in AmplifiersPDF, 44 Kb, 档案已发布: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, 档案已发布: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, 档案已发布: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
模型线
系列: OPA180 (6)
- OPA180ID OPA180IDBVR OPA180IDBVT OPA180IDGKR OPA180IDGKT OPA180IDR
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps