Datasheet Texas Instruments THS4541QRGTRQ1 — 数据表
| 制造商 | Texas Instruments |
| 系列 | THS4541-Q1 |
| 零件号 | THS4541QRGTRQ1 |
汽车高速差分I / O放大器16-VQFN -40至125
数据表
THS4541-Q1 Negative Rail Input, Rail-to-Rail Output, Precision, 850-MHz Fully Differential Amplifier datasheet
PDF, 2.1 Mb, 修订版: A, 档案已发布: Nov 19, 2015
从文件中提取
价格
状态
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
打包
| Pin | 16 |
| Package Type | RGT |
| Industry STD Term | VQFN |
| JEDEC Code | S-PQFP-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | 4541Q1 |
| Width (mm) | 3 |
| Length (mm) | 3 |
| Thickness (mm) | .9 |
| Pitch (mm) | .5 |
| Max Height (mm) | 1 |
| Mechanical Data | 下载 |
参数化
| 2nd Harmonic | 95 dBc |
| 3rd Harmonic | 90 dBc |
| @ MHz | 10 |
| Acl, min spec gain | 1 V/V |
| Additional Features | Shutdown |
| Architecture | Fully Differential |
| BW @ Acl | 620 MHz |
| CMRR(Min) | 85 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 850 MHz |
| Input Bias Current(Max) | 13000000 pA |
| Iq per channel(Max) | 10.5 mA |
| Iq per channel(Typ) | 10.1 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 2.4 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 100 mA |
| Package Group | VQFN |
| Package Size: mm2:W x L | 16VQFN: 9 mm2: 3 x 3(VQFN) PKG |
| Rail-to-Rail | In to V-,Out |
| Rating | Automotive |
| Slew Rate(Typ) | 1500 V/us |
| Total Supply Voltage(Max) | 5.4 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 32 nV/rtHz |
| Vn at Flatband(Typ) | 2.2 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.45 mV |
生态计划
| RoHS | Compliant |
设计套件和评估模块
- Evaluation Modules & Boards: THS4541RGTEVM
THS4541 Evaluation Module in RGT Package
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: DEV-ADC34J22
DEV-ADC34J22 Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
应用须知
- Design for a Wideband Differential Transimpedance DAC Output (Rev. A)PDF, 438 Kb, 修订版: A, 档案已发布: Oct 17, 2016
High-speed digital-to-analog converters commonly offer a complementary current output signal. Most output interface implementations use either a resistive load and/or a transformer to convert this current source signal to a voltage. Where a dc-coupled interface is required, a carefully designed differential transimpedance stage can offer an attractive alternative. Design considerations and options - Noise Analysis for High Speed Op Amps (Rev. A)PDF, 256 Kb, 修订版: A, 档案已发布: Jan 17, 2005
As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
模型线
系列: THS4541-Q1 (1)
- THS4541QRGTRQ1
制造商分类
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)