Datasheet Linear Technology LTC1150CS8#PBF — 数据表

制造商Linear Technology
系列LTC1150
零件号LTC1150CS8#PBF

具内部电容器的 ±15V 零漂移运算放大器

数据表

Datasheet LTC1150
PDF, 245 Kb, 语言: en, 文件上传: Jul 31, 2016, 页数: 16
±15V Zero-Drift Operational Amplifier with Internal Capacitors
从文件中提取

价格

打包

PackageSO-8
Package CodeS8
Package Index05-08-1610 (S8)

参数化

Number of Channels1
Unity Gain BW2.5 MHz
Av Min Stable1 V/V
Avol120 dB
Common Mode Rejection Ratio130 dB
Cload100 pF
Demo BoardsDC417B
Design ToolsLTspice Model
Export Controlno
Ibias0.01 nA
Inoise0.0018 pA/rtHz
Ios0.00002 µA
Iout12 mA
Isupply0.8 mA
LF Enoise1.8 µVPP
Operating Temperature Range0 to 70 °C
Over-the-Topno
PSRR145 dB
Rail-to-RailIn to V-
Rail-to-Rail Inno
Rail-to-Rail Outno
SR3 V/µs
Shutdownyes
Single Supplyyes
TypeZD
VinCM High (from V+)0.003 V
Voh (from V+)0.05 V
Vol (from V-)0.05 V
Vos0.0005 mV
Vos TC0.01 µV/C
Vs Max32 V
Vs Min4.75 V

生态计划

RoHSCompliant

应用须知

  • Bridge Circuits &mdash AN43
    PDF, 3.8 Mb, 档案已发布: Jun 1, 1990
    Subtitled "Marrying Gain and Balance," this note covers signal conditioning circuits for various types of bridges. Included are transducer bridges, AC bridges, Wien bridge oscillators, Schottky bridges, and others. Special attention is given to amplifier selection criteria. Appended sections cover strain gauge transducers, understanding distortion measurements, and historical perspectives on bridge readout mechanisms and Wein bridge oscillators.
    从文件中提取
  • Measurement and Control Circuit Collection &mdash AN45
    PDF, 1.2 Mb, 档案已发布: Jun 5, 1991
    A variety of measurement and control circuits are included in this application note. Eighteen circuits, including ultra low noise amplifiers, current sources, transducer signal conditioners, oscillators, data converters and power supplies are presented. The circuits emphasize precision specifications with relatively simple configurations.
    从文件中提取
  • A Collection of Differential to Single-Ended Signal Conditioning Circuits for Use with the LTC2400, a 24-Bit No Latency Delta Sigma ADC in an SO-8 &mdash AN78
    PDF, 177 Kb, 档案已发布: Aug 7, 1999
    This application note describes six low power differential-tosingle- ended signal conditioning circuits for the LTC2400 No Latency ΔΣTM 24-bit ADC. These circuits offer the customer a number of choices for conditioning differential input signals as low as 5mV to as high as ±2.5V, as well as operation on a single 5V or ±5V supplies. Each circuit description also covers circuit design and implementation techniques that can help preserve the LTC2400's inherently high effective resolution. AN78 concludes with two circuits for digitizing temperature when using an RTD or Type S thermocouple.
    从文件中提取
  • A Standards Lab Grade 20-Bit DAC with 0.1ppm/В° Drift: The Dedicated Art of Digitizing One Part Per Million &mdash AN86
    PDF, 540 Kb, 档案已发布: Jan 1, 2001
    This publication details a true 1ppm D-to-A converter. Total DC error of this processor corrected DAC remains within 1ppm from 18-32°C, including reference drift. DAC error exclusive of reference drift is substantially better. Construction details and performance verification techniques are included, along with a complete software listing.
    从文件中提取
  • Signal Sources, Conditioners and Power Circuitry Circuits of the Fall, 2004 &mdash AN98
    PDF, 886 Kb, 档案已发布: Nov 19, 2004
    Eighteen circuits are presented in this compilation. Signal sources include a voltage controlled current source, an amplitude/frequency stabilized sine wave oscillator, a versatile, 0V to 50V wideband level shift and four sub-nanosecond pulse generators with risetimes as low as 20ps. Five signal conditioners appear; a unique, single positive rail powered amplifier with output to (and below) zero volts, a milliohmmeter, a 0.02% accurate instrumentation amplifier with 120dB CMRR at 125VCM, a 100MHz switch with 5mV control channel feedthrough and a 5V powered, 15ppm linearity quartz stabilized V→F, converter. The power circuits section features a Xenon flashlamp supply, two 5V powered, 0V to 300V DC/DC converters, a fixed 200V output circuit for APD bias, a 100W 0V to 500V, 28V powered converter and a high current paralleling scheme for linear regulators. Two appended sections consider measurement technique and connection practice in sub-nanosecond circuits.
    从文件中提取

设计须知

  • Chopper vs Bipolar Op Amps—An Unbiased Comparison &mdash DN42
    PDF, 70 Kb, 档案已发布: Dec 1, 1990
    从文件中提取

模型线

制造商分类

  • Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > Low Bias Current Amplifiers (Ib < 100pA) | High Voltage Amplifiers (>12V) | Precision Amplifiers (Vos | Zero-Drift Amplifiers | Low Power Amplifiers (Is < 1mA/amp)

其他名称:

LTC1150CS8PBF, LTC1150CS8 PBF