Datasheet Kingbright KA-3528SURC — 数据表

3.5x2.8 mm SMD CHIP LED LAMP P/N: KA-3528SURC HYPER RED Features Description z SINGLE The Hyper Red source color devices are made with COLOR. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER DH InGaAlP on GaAs substrate Light Emitting Diode. PROCESS. z AVAILABLE
z IDEAL FOR BACKLIGHTING. z PACKAGE
zRoHS ON TAPE AND REEL. : 1500PCS / REEL. COMPLIANT. Package Dimensions Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3.Specifications are subject to change without notice. SPEC NO: '6$$ REV NO: V.11 APPROVED: J. Lu CHECKED: Allen Liu DATE: NOV/05/2005
DRAWN: F.LI PAGE: 1 OF 4 Selection Guide
Part No. Dice KA-3528SURC Iv (mcd)
@ 20mA Lens Type HYPER RED (InGaAlP) WATER CLEAR Viewing
Angle Min. Typ. 2θ1/2 110 230 120° Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C
Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 640 nm IF=20mA Hyper Red 628 nm IF=20mA Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C
Parameter Hyper Red Units Power dissipation 125 mW DC Forward Current 50 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage
Operating / Storage Temperature -40°C To +85°C Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: '6$$ REV NO: V.11 APPROVED: J. Lu CHECKED: Allen Liu DATE: NOV/05/2005
DRAWN: F.LI PAGE: 2 OF 4 Hyper Red KA-3528SURC SPEC NO: '6$$ REV NO: V.11 APPROVED: J. Lu CHECKED: Allen Liu DATE: NOV/05/2005
DRAWN: F.LI PAGE: 3 OF 4 KA-3528SURC Recommended Soldering Pattern
(Units : mm) Tape Specifications
(Units : mm) Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity/ Luminous Flux: +/-15% …